1.Saving labor due to the control of discharging form and discharging tension;
2.Because of the breakthrough improvement of the overall structure and transmission principle compared with the traditional calender, it effectively solves the problem of bubble generation during the rolling process of silica gel, the efficiency is increased by 2-3 times, the power saving is 50-90%, and the thickness error is smaller (+ /-0.015mm).
3.Based on this, our company has developed a full digital display type (real-time monitoring and display of the speed and gap of each roller, display accuracy 0.01mm), and an electronically adjustable full digital display type (speed and clearance of each roller) in response to different customer needs. Real-time monitoring and display, electrically adjusting the gap between rollers, display accuracy 0.01mm), fully computer-controlled (set the speed and gap of each roller through microcomputer PLC and touch-type human-machine interface, and monitor and display in real time, automatically adjust the gap between each roller, (Display accuracy: 0.01mm) and other products.
4.According to customer requirements, in view of the low tensile strength, high viscosity, and easy-to-adhesive rollers of thermally conductive silicone, develop a fully computer-controlled thermally conductive silicone calender (more The speed and gap of each roll are monitored and displayed in real time, and the gap of each roll is automatically adjusted with a display accuracy of 0.01mm. Non-adhesive (including high-adhesive tape) brings the gospel to thermal silicone manufacturers.
※ Basic unloading form: integrated unloading base, easy to operate and small space.
※ Feeding control system: using magnetic powder brake and tension controller to realize automatic tension control and save labor.
※ Drive part of the main machine: Adopt AC inverter special motor with inverter as the rolling power transmission. The speed of each roller is independently controlled, which can adapt to the efficient production of different thickness products, and ensure the product quality, saving 50-90% power.
※ Roller cooling device: The rotary joint is used to pass cooling water to keep the roller at the working temperature to ensure the life of the roller and the accuracy of the machine.
※ Automatic meter counting device: It adopts automatic meter counting device and can set two-stage length to accurately control the pressure extension.
Machine manufacturing width: 0.63M-1M
Maximum discharge diameter: 600mm
Inner core of discharge tube: 1 "-3"
Maximum roller distance: 6mm (can be increased to 15mm according to customer requirements)
Maximum film thickness: 5mm (can be increased to 10mm according to customer requirements)
Maximum running speed: 15m / min
Film accuracy error: ± 0.015mm